Penford
   

800-582-8728

Natural Coating Binders

Coated Paper and Board Strength Without the Synthetic

Our newest technologies for coating, Pen-cote® L binder and Pen-cote® D binder, give coating formulators the ability to extend up to 60% of the latex binder in a coating formulation on a 1:1 basis, one part Pen-cote® L substituted for one part latex. The coating formula will have the same or better binding strength compared to the manufacturers current latex formulation. This is because our product is high in molecular weight, and water holdout is improved to keep the binder on the sheet surface. The customer gets higher value from substituting equal parts of the costly latex for less-expensive Pen-cote L or Pen-cote D while maintaining or improving quality.
Functionality Recommended
Products
Technical Specs Features  Request A Sample 
Binder (Coater) Pen-cote® L 1000  Product Data Sheet
 MSDS
Replace up to 60% of latex with Pen-cote L at 50% solids. Ready to use liquid that maintains IGT Pick, IGT Blister and Printability. Improves water holding by 40-50% with less binder migration for better coverage. Greater performance at lower cost.
Binder (Coater) Pen-cote® D UUHV
Product designed to be used as protein replacer, may also allow for replacement of 1-2 parts of latex in coating formulation. Easily re-hydrates in coating makedown tank under sufficient agitation. Higher molecular weight than Pen-cote D UHV.
Binder (Coater) Pen-cote® D ULV  Product Data Sheet
 MSDS
Replace up to 60% of latex with Pen-cote® D dry. Readily dispersible binder maintains IGT Pick, IGT Blister and Printability. Improves water holding by 40-50% with less binder migration for better coverage. Designed for shipping internationally and mills with lower usage rates where shelf life might be a concern. Lowest viscosity product within the product line.
Binder (Coater) Pen-cote® D UHV  Product Data Sheet
 MSDS
Product designed to be used as coating binder to replace latex and/or protein. Can easily be re-hydrated in coating makedown tank under sufficient agitation. May allow for significant reduction in thickener due to its near native molecular weight.
Binder (Coater) Pen-cote® D MV  Product Data Sheet
 MSDS
Replace up to 60% of latex with Pen-cote® D dry. Readily dispersible binder maintains IGT Pick, IGT Blister and Printability. Improves water holding by 40-50% with less binder migration for better coverage. Designed for shipping internationally and mills with lower usage rates where shelf life might be a concern. Mid-range viscosity product within the product line.
Binder (Coater) Pen-cote® D LV  Product Data Sheet
 MSDS
Replace up to 60% of latex with Pen-cote® D dry. Readily dispersible binder maintains IGT Pick, IGT Blister and Printability. Improves water holding by 40-50% with less binder migration for better coverage. Designed for shipping internationally and mills with lower usage rates where shelf life might be a concern. Lower viscosity product within the product line.
Binder (Coater) Pen-cote® D HV  Product Data Sheet
 MSDS
Replace up to 60% of latex with Pen-cote® D dry. Readily dispersible binder maintains IGT Pick, IGT Blister and Printability. Improves water holding by 40-50% with less binder migration for better coverage. Designed for shipping internationally and mills with lower usage rates where shelf life might be a concern. Higher viscosity product within the product line.

Recently Viewed Applications

There are no Applications in your view list

You have no requested samples.

To get started finding samples, start browsing by market, then application, then functionality.